Chainsaws that available at the electrichainsaw web site become a major requirement for logging both for the needs of the furniture industry and plywood. Because oftentimes use, of course, the condition of the saw blades or the bars and chains will experience wear and no longer sharp or even broken when used. That is why it is necessary to do routine maintenance so that the condition is always good and well-groomed. To maintain and install chainsaw blades and chains you can do it yourself, but of course, you have to understand in advance how to install easy to install saw blades. Before you do the installation, prepare the tools and equipment for personal safety. Always use gloves when installing saw blades and chains to avoid serious accidents.
First, you want to make sure the chain brakes are in the normal or inactive position by pushing the hand guard-forward. Then you need to remove the saw blade nut and remove the sprocket protector. Adjust the saw blade with the saw blade fastener, and place the saw blade in the backmost position. Place the chain on the drive sprocket and the saw blade rails, making sure the cutting edge of the chain is above the saw blade and facing the front. And then you install the clutch cover and place the chain adjusting pin in the hole of the saw blade, check that the side of the chain cutter is correctly attached to the drive sprocket and the chain is on the saw blade rail. Tighten the saw blade nuts and fasten the chain using a wrench clockwise.
The chain must be fastened so that it is just below the saw blade. Hold the edge of the saw blade and tighten the chain, so that it does not sag at the bottom of the saw blade but can still be rotated easily by hand. Hold the edge of the saw blade and tighten the nut of the saw blade with the wrench. When installing a new chain, chain tension must be checked frequently until the chain is used. Check the chain tension regularly, the right tightness will make a good cut and the chain will last longer.